next »

[vinod]

Hi all,
        I am trying to flash u-boot to the flash memory of tribbox and i face the following problems

1) when using kermit to send u-boot.bin
   
   send u-boot.bin

   Error:
         warning: flash_make_cmd - unsupported little endian problem

2) I am using u-boot loader for st7100mboard . Is that the problem ?
   Is the u-boot loader should be configured for tribbox ?  If yes

3) How to configure u-boot loader for tribbox.

Please help me out of this problem.


Thanks and Regards
Vinod K

[cobra]

can you me send your u-boot loader for st7100mboard and JTAG shema

my mail velikabeba@yahoo.com


THANX

[frenkel.michael]

Hi vinod

You not need kermit to load u-boot.bin in the flash memory of tribbox.
Please setup the nfs-server or tftp server on your host PC.
Then you can load the u-boot.bin in the flash memory from the tribbox.
Have you load the data via tftp or nfs then you can flash the board from the
U-Boot shell.
On the tribbox website you find an documment this describe how to setup the variables in the U-Boot shell and how to flash a new kernel in the flash
memory. Sorry the manual it is only in german. Plaese ask the other people
on this forum he can help you translate the manual in english.
Sorry my english is not very good to translate this manual.

regards
       Micha

[vinod]

Hi Micha,

Thanks for timely reply.

We successfully flashed u-boot in tribbox.

Thanks

Vinod.K